How do I mount my Urban Iki rear seat with carrier mounting?
Do you want to start new cycling adventures with your little one? The manual below helps you to install your rear seat safely and quickly on your luggage carrier. If you prefer a visual guide, you can also watch the instruction video. All the necessary assembly materials are included with the purchase of your seat. Keep them at hand and just follow the easy steps to mount, use and detach your Urban Iki rear seat!
#MountinghelpInstruction videoWatch the mounting video here. Assemble the seat easily and quickly, so you can soon enjoy your first bike ride with your little one(s).Go to the instruction video
#MountinghelpManual PDFPrefer to follow the technical drawings step by step? Download the clear manual.Download manual
This is what you need to install your rear seat with carrier mounting:
Take the two leg protectors and slide them into each other until they are tightly locked. Then lay the rear seat on its back, let the cable dangle and slide the leg sections into the slots on either side of the rear seat until you hear a ‘click’. This means the leg protectors are firmly attached.
Step 1: Make the mounting frame fit your luggage rack
Use the Allen wrench to loosen the mounting frame hooks. This allows you to move them and make the frame fit your luggage rack. Make sure to install the frame lengthwise on your luggage carrier.
Step 2: Position the mounting frame correctly on the luggage carrier
Make sure that the open part of the mounting frame is positioned exactly above the axle of your back wheel.
Step 3: Attach the mounting frame to your rack
Use the allen wrench to tighten the hooks of the mounting frame (clockwise). This firmly attaches the frame to the luggage carrier of your bicycle.
Step 4: Click the Urban Iki rear seat on the mounting frame
Great, the mounting frame is now firmly attached to your luggage carrier. Take the rear seat for the most important step: attaching the Urban Iki rear seat to your bike.
Hold the bundle in one hand and the back of the seat in the other.
Slide the seat horizontally over the frame, while making sure to keep the seat centered.
Apply pressure to the top of the back and keep pushing down until you hear a ‘click’. Note: the seat is correctly attached when the red sticker above the clip is no longer visible!
Check if the seat is securely attached by rocking it back and forth.
How do I detach the carrier-mounted rear seat?
You can detach the rear seat in two simple steps. This allows you to leave the seat at home when you are going out without mini-me.
Step 1: Release the Urban Iki seat and take it off your bike
Hold the 5-point belt in one hand. Pull the clip downwards and the disc at the bottom backwards with your other hand. This allows you to remove the seat in one fluid movement. Easy as 1, 2, 3!
Watch our mounting video on how to mount an Urban Iki rear seat with carrier mounting