How do I mount the Urban Iki U–me rear seat with frame mounting?

Want to explore the wide world with your child on the back of your bike? With our mounting guide, you can easily and quickly mount the Urban Iki U–me rear seat with frame mounting all by yourself. You can also use our instruction video if you prefer. take the packaging materials and check below to see how you can easily attach, detach, and use your Urban Iki bike seat with frame mount.

#MountinghelpInstruction videoWatch the mounting video here. Assemble the seat easily and quickly, so you can soon enjoy your first bike ride with your little one(s).Go to instruction video

#MountinghelpManual PDFPrefer to follow the technical drawings step by step? Download the clear manual.Download manual

Easily attach the frame mounting bracket to your bicycle

To attach the child seat to your own bike, you’ll need the U–me rear seat, the frame mounting bracket, the frame mounting block with screws, the mounting frame, an Allen key, and your own bike. Curious if the rear seat with frame mounting fits your bike? In this blog, we’ll tell you all about it.

Step 1: Attach the foot straps and place the footrests

Slide the foot straps into the footrests with the correct side facing forward. Then click the footrests into the bike seat.

Montagehulp voetenbakje plaatsen

Step 2: Insert the bolts into the mounting block

First, place a washer around each bolt (four in total) and make sure the covers under the mounting block are closed. Then insert the bolts into the four designated holes on the top of the mounting block.

Bouten in frame montageblok

Step 3: Attach the mounting block to the frame of your bicycle

Place a dowel over the bolts and determine the correct height for the frame block by holding the bracket next to it. The frame should extend above the wheel. Tighten the bolts (clockwise) with the Allen key.

Step 4: Attach the mounting block cover

Slide the cover onto the mounting block (from top to bottom) until you hear a ‘click’.

Step 5: Click the frame mounting bracket into the frame mounting block

Now that the mounting block is securely attached to the frame of your bicycle, you can insert the frame bracket into the mounting block. Place the bracket in the designated holes on the backside. Please note: only when you hear a clear ‘click’, the frame mounting bracket is securely in place!

Attach the Urban Iki rear seat to the frame bracket in 5 simple steps

Now it’s time to mount the Urban Iki bicycle seat on the frame bracket. Keep the assembled rear seat, mounting frame, and Allen wrench at hand.

Step 1: Open the Easyfix system

Make sure the clamps are wide enough apart to create space for placing the rear seat on your bike. Do this by pressing the rotary knob and then turning it to the left.

U–me easyfix open draaien

Step 2: Place the rear seat on the luggage carrier

Place the Easyfix rear seat on the luggage carrier. Ensure that the safety strap rests on the seat. Make sure the four clamps fit around the luggage carrier. Turn the rotary knob to the left if needed to widen the space between the clamps.

U–me zitje plaatsen op drager

Step 3: Secure the bike seat with the rotary knob

Turn the rotary knob to the right to secure the seat to the luggage carrier. Check if the seat is firmly attached by moving it back and forth briefly. The rear seat is now securely attached to your bike.

U–me achterzitje vastdraaien

Step 4: Secure the safety strap

Next, wrap the safety strap around the bike frame and secure it. Ensure that both buckles are on either side of the frame tube. Fasten the remaining part of the strap in the smaller buckle so that it doesn’t hang loose towards the wheel.

U–me gordelband vastmaken

Step 5: Adjust the seat to the correct size

Now that the seat is securely attached, adjust the footrests to the correct height by moving the clips at the back closer together.

U–me voetsteunen verplaatsen

How do I demount the frame mounted Urban Iki rear seat?

The Urban Iki bicycle seat is easy to detach. This allows you to cycle without a seat when you go out without your child.

Step 1: Remove the frame mounting bracket from the mounting block

Press the square black cap of the frame mounting block slightly down to remove the frame mounting bracket inlcluding the bike seat.

Shopping bag

Shopping bag

Search

Your location

Nederland/België

United Kingdom

Deutschland

Danmark

Reviews