Nederland/België
United Kingdom
Deutschland
Danmark
Collect the following materials:
1x Urban Iki front seat
1x Urban Iki compact adapter, including the supplied mounting tool
Thanks to the compact adapter from Urban Iki, you can mount front seats with great ease. The bicycle seat is therefore no problem for e-bikes and sporty bicycles. To place the compact adapter with the high 25-28 mm inserts, you need a stem of at least 19 mm in height. You can easily attach the front seat and possibly a windshield to the adapter! Are you not installing a windshield? Then you can finish off the compact adapter nicely with a cover.
Raise the footrest levers first. Slide the footrests on both sides at the correct height on the bicycle seat. Hold the bicycle seat firmly and tap the bottom of the footrest firmly so that it slides over the safety tab. When the height is set correctly, push the levers down.
Place the parts of the compact adapter on the table and choose two small half moons with the description ’25-28 mm’. Keep these parts separate.
Open the compact adapter by loosening the two Allen screws with an Allen key. The circle is now open. You press the two half moons into the two half circles. The compact adapter now has the correct size for the stem of your bicycle.
To place the compact adapter, you need a minimum of 19 mm stem. Slide your bicycle handlebars up if necessary.
Now press the compact adapter onto the stem, with the Allen screws pointing backwards. Hold tight with one hand while tightening both Allen bolts with your other hand. The adapter is secure enough if you can no longer move it back and forth. Tighten if necessary.
Take the bicycle seat and push the tab at the bottom upwards so that you can slide the seat into the wide slot at the back of the adapter. The seat is in the correct position when you hear a clear ‘click’. Check additionally whether the bicycle seat is firmly attached by briefly moving the bicycle seat back and forth.
Lift the Urban Iki front seat by pushing the tab up. You can already make bicycle rides without a bicycle seat. Do you also want to remove the compact adapter? Loosen the Allen screws at the rear and remove the adapter from the handlebar.
Now your little one can enjoy your rides together. The compact adapter offers the possibility to add an Urban Iki windshield later. This prevents numb hands. You place this in place of the cover. Extra nice: the Urban Iki styling set! This allows you to change the color combinations of the chair.