Step 1: Prepare the footrests for mounting
Put the two footrests up. Loosen the screws and pull off the half-round casing.
1x Urban Iki Junior or just the footrests
1x Urban Iki foot protectors
Follow the next steps to attach the foot protectors to the Urban Iki Junior seat.
Put the two footrests up. Loosen the screws and pull off the half-round casing.
The Junior footrests fit exactly in the middle of the foot protectors. Slide them over each other.
The foot protectors should not impede the rotation of your wheel. Determine whether position 1 or 2 fits best on your bike by holding the footrests with protectors against the rear fork.
Place the footrests with foot protectors around the frame of the rear wheel and place the half-round casing for attachment behind them. Now tighten the two screws, but make sure they are not fully tightened yet so you can still adjust them to the correct height. Use the Allen key for this. Also, tighten the screws of the other footrest. Repeat the above steps for the other footrest.
Once you’ve determined the correct height, tighten the footrests securely and check that the foot protectors do not come into contact with the wheel.
The foot protectors provide extra safety, especially for bikes without spoke or coat protection. This clever accessory makes every bike ride worry-free and safe.